Silicone sealant
From：
JINAN HOT SEALANT MATERIAL CO., LTD Date：01-04 56 Belong to：News
sketch
One component silicone glass adhesive is similar to ointment. Once it comes into contact with moisture in the air, it will solidify into a tough rubber solid material. Silicone glass adhesive has strong adhesive force, high tensile strength, weather resistance, vibration resistance, moisture resistance, odor resistance and large changes in cold and heat. In addition to its wide applicability, it can realize the bonding between most building materials products, so it has great application value. Silicone glass adhesive will not flow due to its own weight, so it can be used for joints over the top or side wall without subsidence, collapse or flow away. It is mainly used for bonding dry and clean metal and glass, most oil-free wood, silicone resin, sulfurized silicone rubber, ceramics, natural and synthetic fibers, and many paint plastic surfaces. The silicone glass adhesive with good quality will not be extruded and the physical properties will not change when it is used below 0 ℃.
purpose
（1） Acid glass glue. 1. It is suitable for sealing, blocking, leak proof and weather proof purposes. It is suitable for both indoor and outdoor (indoor effect is better), and the anti-seepage and leak proof effect is remarkable. 2. Bonding various interior decoration of automobile, including metal, fabric, organic fabric and plastic. 3. Engage the gasket on the heating and cooling equipment. 4. Add ribs without screw holes, nameplates and painted plastic materials on the metal surface. 5. Seal the window on the oven door, the flue, pipe joint and channel door on the gas appliance. 6. Provide immediately formed leak proof pads for gearbox, compressor and pump. 7. Seal the cabin and window. 8. Sealing of glass window of trailer and truck cab. 9. Bonding and sealing equipment components. 10. Form an anti-wear coating. 11. Inlay and fill thin metal sheet laminations, pipe networks and equipment casings.
（2） Neutral weather resistant adhesive is suitable for weather resistant sealing of various curtain walls, especially recommended for weather resistant sealing of glass curtain wall, aluminum plastic plate curtain wall and stone dry hanging; 2. Joint sealing between metal, glass, aluminum, ceramic tile, plexiglass and coated glass; 3. Joint sealing of concrete, cement, masonry, rock, marble, steel, wood, anodized aluminum and painted aluminum surfaces. Primer is not required in most cases.
（3） Silicone structural adhesive is mainly used for structural or non structural bonding assembly between metal and glass of glass curtain wall. 2. It can directly connect the glass with the surface of metal components to form a single assembly component, which can meet the design requirements of full hidden or semi hidden frame curtain wall. 3. Structural bonding and sealing of insulating glass. 3、 Limiting conditions when using various silicone glass adhesives, they will be subject to the following restrictions: 1. It is not suitable to construct in places soaked with water for a long time; 2. Materials that are insoluble in grease, plasticizer or solvent; 3. Frosted or wet surfaces cannot be bonded; 4. It cannot be cured in a completely closed place; 5. The substrate surface is not clean or firm. Acid glass adhesive has the following restrictions: acid silicone glass adhesive will corrode or cannot bond copper, brass (and other copper containing alloys), magnesium, zinc, electroplating metals (and other zinc containing alloys). At the same time, it is recommended not to use acid glass adhesive on articles made of brick and stone and iron carbide matrix. It is recommended not to use acid glass adhesive on methyl isobutyrate, polycarbonate, polypropylene If this product is used on materials made of polyethylene and polytetrafluoroethylene, it will not obtain good bonding effect and good compatibility. It is not suitable to use acid glass adhesive for connections with movement greater than 25% of the joint width. It is also best not to use ordinary acid glass adhesive on structural glass. In addition, acid glass adhesive shall not be used where there is abrasion and substantial disadvantages. The substrate surface temperature of silicone acid adhesive exceeds 40 ℃ and should not be constructed.
One component silicone glass adhesive is similar to ointment. Once it comes into contact with moisture in the air, it will solidify into a tough rubber solid material. Silicone glass adhesive has strong adhesive force, high tensile strength, weather resistance, vibration resistance, moisture resistance, odor resistance and large changes in cold and heat. In addition to its wide applicability, it can realize the bonding between most building materials products, so it has great application value. Silicone glass adhesive will not flow due to its own weight, so it can be used for joints over the top or side wall without subsidence, collapse or flow away. It is mainly used for bonding dry and clean metal and glass, most oil-free wood, silicone resin, sulfurized silicone rubber, ceramics, natural and synthetic fibers, and many paint plastic surfaces. The silicone glass adhesive with good quality will not be extruded and the physical properties will not change when it is used below 0 ℃.
purpose
（1） Acid glass glue. 1. It is suitable for sealing, blocking, leak proof and weather proof purposes. It is suitable for both indoor and outdoor (indoor effect is better), and the anti-seepage and leak proof effect is remarkable. 2. Bonding various interior decoration of automobile, including metal, fabric, organic fabric and plastic. 3. Engage the gasket on the heating and cooling equipment. 4. Add ribs without screw holes, nameplates and painted plastic materials on the metal surface. 5. Seal the window on the oven door, the flue, pipe joint and channel door on the gas appliance. 6. Provide immediately formed leak proof pads for gearbox, compressor and pump. 7. Seal the cabin and window. 8. Sealing of glass window of trailer and truck cab. 9. Bonding and sealing equipment components. 10. Form an anti-wear coating. 11. Inlay and fill thin metal sheet laminations, pipe networks and equipment casings.
（2） Neutral weather resistant adhesive is suitable for weather resistant sealing of various curtain walls, especially recommended for weather resistant sealing of glass curtain wall, aluminum plastic plate curtain wall and stone dry hanging; 2. Joint sealing between metal, glass, aluminum, ceramic tile, plexiglass and coated glass; 3. Joint sealing of concrete, cement, masonry, rock, marble, steel, wood, anodized aluminum and painted aluminum surfaces. Primer is not required in most cases.
（3） Silicone structural adhesive is mainly used for structural or non structural bonding assembly between metal and glass of glass curtain wall. 2. It can directly connect the glass with the surface of metal components to form a single assembly component, which can meet the design requirements of full hidden or semi hidden frame curtain wall. 3. Structural bonding and sealing of insulating glass. 3、 Limiting conditions when using various silicone glass adhesives, they will be subject to the following restrictions: 1. It is not suitable to construct in places soaked with water for a long time; 2. Materials that are insoluble in grease, plasticizer or solvent; 3. Frosted or wet surfaces cannot be bonded; 4. It cannot be cured in a completely closed place; 5. The substrate surface is not clean or firm. Acid glass adhesive has the following restrictions: acid silicone glass adhesive will corrode or cannot bond copper, brass (and other copper containing alloys), magnesium, zinc, electroplating metals (and other zinc containing alloys). At the same time, it is recommended not to use acid glass adhesive on articles made of brick and stone and iron carbide matrix. It is recommended not to use acid glass adhesive on methyl isobutyrate, polycarbonate, polypropylene If this product is used on materials made of polyethylene and polytetrafluoroethylene, it will not obtain good bonding effect and good compatibility. It is not suitable to use acid glass adhesive for connections with movement greater than 25% of the joint width. It is also best not to use ordinary acid glass adhesive on structural glass. In addition, acid glass adhesive shall not be used where there is abrasion and substantial disadvantages. The substrate surface temperature of silicone acid adhesive exceeds 40 ℃ and should not be constructed.
